Flute Punch

Posts Tagged ‘flute

My custom flute case cover with custom embroidery from MischiefDesigns arrived Friday. It’s a graduation gift for another flutist, but it looks so fantastic, I thought about keeping it! It’s slightly oversized, to accommodate both student and professional style cases.

black flute case cover with embroidery

MischiefDesigns flute case cover with embroidery

Advertisements

Tone is influenced primarily by three factors:

  1. Embouchure, particularly the lower lip
  2. Tongue placement
  3. Oral space/open throat

In my previous two posts, I discussed lower lip placement and formation, and tongue placement. This final post in series will cover oral space.

Have you ever sung in the shower? Have you ever played flute in a bathroom or other space with a lot of hard surfaces? At one time or another, most musicians enjoy performing in these spaces because they are resonant — the sound lingers a bit longer and sounds fuller.

Believe it or not, you can achieve a similar quality inside your head by having a relaxed, “open” throat. The easiest and simplest way to create this space is to image you’re riding in a car on a cold morning. The windows are foggy. What do you do? If you’re a kid at heart, you take your finger and write something in the fog. Several minutes later, the windows have cleared up. What do you do? You breathe hot air to fog it up again!

Try this exercise right where you are (no car necessary!). Hold your hand in front of your face, pretend it’s a window, and fog it up. (Or pretend you’re checking for bad breath!) Do it several times and feel the space in the back of your mouth at the top of your throat. Notice how the throat is relaxed. If you try to create a space that is too large, you will develop unhealthy throat tension.

If you tried my tips in the previous posts over the last couple of weeks, you’re now in a better position to apply this third technique. You should notice the sound become warmer, fuller, and more vibrant.

Tone is influenced primarily by three factors:

  1. Embouchure, particularly the lower lip
  2. Tongue placement
  3. Oral space/open throat

In my previous post, I discussed embouchure, particularly lower lip placement and formation. In today’s post, I’ll be covering tongue placement.

To produce great tone, the back of the tongue should be placed higher in the mouth. This causes the air to pass over it in a more “compressed” fashion and exit the aperture (the hole your lips make) at a higher, more energized speed. If the tongue is too low in the mouth, placing the tongue higher almost always results in a dramatic improvement in sound.

Two concepts I use to achieve this:

  1. “Mountain” tongue — think of the tongue as a mountain range inside the mouth. Just as with mountains on earth, the air passing over them moves at a faster rate.
  2. Say the word “key.” Say it several times while noticing where the sides of your tongue contact your teeth. You should feel the sides contacting your upper molars.

Make changes gradually! After you have done the “key” exercise, play a long note using the new tongue position. Assuming you are moving enough air and have established breath support, you should hear the sound become stronger and more defined.

Once you’ve achieved this, try tonguing. If you notice the sound is negatively affected, you may be tonguing between the lips. This is an established method of tonguing, usually taught with the “spitting rice” technique, but it’s not the tonguing I teach for multiple reasons, and this is one of them. In my opinion, it’s difficult to tongue between the lips while maintaining a high tongue position. It’s almost as though the tongue isn’t long enough to do both. If you feel this is your difficulty, try tonguing so the tip of the tongue lands on the backside of the upper front teeth, as though you are saying “too.” Once you’ve got the hang of that, go back to the high tongue placement exercises.

Tone is influenced primarily by three factors:

  1. Embouchure, particularly the lower lip
  2. Tongue placement
  3. Oral space/open throat

In this first of three posts, I’ll discuss the lower lip and its role in tone production.

Ever had chapped lips? The surface of the lips frays and dead skin peeling causes the lips to feel fuzzy and flaky. Even on a day when the lips are not chapped, the outer edge of the lips is still rougher than the inside edge.

A trained embouchure will expose more of the inside of the lip by rolling it outward. This, in turn, means that the corners of the mouth must pull the lip a bit more taut. The result is a smoother surface for the airstream to pass over.

The best way to evaluate this (or any) aspect of your embouchure is to look in a mirror while playing. The primary characteristic I look for in students is contact between the lower lip and the lip plate. You should see the lower lip contacting the lip plate on either side of the embouchure hole.

Average lower lip position

This is a typical flute embouchure. It’s nice, but not much of the lower lip is contacting the lip plate. It also tends to play sharp.

Better lower lip formation

More lower lip is contacting the lip plate. More of the smooth inner surface is exposed. Corners of mouth are directed downward.

If you’re struggling, try the following concepts:

  • “Smash” or “squish” the lower lip against the lip plate
  • Roll the lower lip out
  • “Pout,” which will roll the lip and engage the corners of the mouth

It’s important that the corners of the mouth engage, usually in a backward or downward/frowning motion.

Two parting words of caution:

  1. Leave smiling to the vocalists. On flute, smiling will pull the lower lip up and away from the lip plate, which is the opposite of what we want to achieve.
  2. Double-check lip plate position. Many players place the lip plate slightly too high on the red part of the lower lip. Using the mirror, make sure the edge of the embouchure hole contacts the face at the point where the chin skin meets the red part of the lower lip.

If you find your placement is indeed a bit high, and you make this adjustment, it’s possible that at first, no sound will come out. That’s OK! If that happens, keep the new placement while trying the tips above. Placing the lip plate at this point on the face will require you to use a better embouchure. When working with students on this aspect of playing, it only takes a couple of minutes before sound is again produced, and it is always a higher quality sound.

 

The moral of this story? Always have your flute with you. You never know when you might need a random solo to ease international relations.

Tags: , ,

If you saw my previous post, you might think I didn’t enjoy being at State. I actually did enjoy myself quite a bit, taking in wonderful performances by students in small woodwind ensembles and solo flute. I wasn’t able to hear all the soloists, but following is a sampling of the solos performed, including 3 that were new to me!

Khachaturian, 3rd mvt. (Yes, a high schooler was playing this, with great articulation, nonetheless.)

Taktakishvili, 3rd mvt.

Doppler, Hungarian Pastoral Fantasy

Deutilleux, Sonatine

Gordon Jacob, Concerto

Hue, Fantasy

Gaubert, Fantasy

Tags: , ,

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Join 304 other followers

Archives

Flickr Photos

Latest Bookmarks